Posts

Posted on

BMW Engine Repair Troubleshooting Guide

If you’re on the look for a BMW Mechanic in Roseville, you might want to be prepared with some information taken out beforehand. There are a few fundamental troubleshooting questions that you ought to be well aware of. We are going to take a spin and see which ones of them could signify a serious issue.

While there are a lot of different explanations and potential reasons for a lot of the following, they are a sure sign that a repair is underway, and you might want to consider setting some time aside for it.

Engine Not Starting?

Don’t lose your mind just yet. While this might sound like the most severe issues of them all, it’s not a sure sign that everything has gone south. If your engine fails to start, you might not yet need engine services. It might be an issue connected with your battery. It can be an issue with the wiring or something else.

Check the connections and make sure to give them a proper wiggle to ensure that they are secured.

Trouble Starting Engine in Cold?

It is an issue that a lot of BMW owners might experience, and the reasons might be close to the same as before. However, experiencing sluggishness in your engine, especially if it’s not diesel-type, might signify a more pressing issue. It’s something that you ought to consider and make sure that you don’t overlook it. Engine repair might sound like an unwanted thing, but the more you put it off, the more it’s going to develop.

Breaks Screeching

One of the sure things that you have to visit a place for BMW Repair in Roseville is the sound of screeching breaks. It is something that comes when they get all used up.

Another thing to consider in cases like this is that when you start hearing your breaks screeching it’s also likely that you’d have to take advantage of an oil change service. The kilometers usually coincide – this is something quite remarkable.

All in all, those are some of the most basic things to keep in mind if you are wondering whether or not your vehicle needs a current repair. However, it is also important to note that you need to be doing your maintenance regularly.

For example, you have to make sure that you are doing your 30K services and all that regularly to ensure that everything is handled as per the highest standards.

Remember, your vehicle’s maintenance is your responsibility. However, it’s not something that you are doing just for you – it’s something that you are doing for the safety of everyone around you. Millions of car crashes are taking part throughout the entire world every single year because of failed maintenance and inappropriate condition of vehicles. It is easily avoidable if you take proper care of your car and make sure that everything is handled as per the requirements – it doesn’t take much, but it has to be done!

Posted on

Tips On How To Find A Mercedes Mechanic

Your vehicle is undoubtedly one of the most treasured possessions that you have, and it’s quite essential to keep it in proper condition. It is especially true if you are driving a Mercedes. If there is one thing that you need to be aware of is that the more you put off the fixing of an issue – the more you are going to have to pay for it later on.

However, finding a reliable Mercedes service in Roseville, CA, might be a challenge. With so many different professionals on the market, how do you know which one is truly worth your money and attention? Here are good tips to take into account.

Ask Questions

When you get your Mercedes to a Roseville Mercedes repair shop, you have to be as nosy as you can. Of course, that’s the case if you are going to a new place. Now, you may not know much about your car’s anatomy, and that’s completely fine – you don’t need to. Your mechanic, though, has to. If you are in for brake repair – start asking some fundamental questions such as how many miles you have to go through for this to take place. Why is there an issue? Is it serious? How is it repaired?

Seasoned Mercedes professionals with experience in handling this particular type of car would be able to answer those in a matter of moments. Having your vehicle for a brake service, while seemingly straightforward, is a task that has to be handled with severe cautious as it’s one of the essential functions of your vehicle.

Check Out Their Equipment

Having specialized equipment is amongst the most important things to look out for when you take your vehicle for a fix, regardless of it’s a tire service or something else. Take a look at the shop – is it clean? Is it well-equipped and organized? Do people working in it have special workplace uniforms?

These are the telling signs that you have to be extra vigilant of. However, you should also pay attention to the overall outlook of the venue and make sure that it does stand out, especially if you are driving a more expensive vehicle.

Be Prepared

The easiest way for someone to pull one over your, regardless of it’s a matter of a reasonably inexpensive tire repair or for something else, is for you to be underinformed. You have to be well aware of the approximate estimation of the service that you are looking for to prevent any issues and any potential con artists. It is quite important.

These are just a few tips which will help you identify the best service shops in the area. Of course, it is always best to be entirely aware of what’s wrong with your vehicle – this way you will be able to identify the best person or service that will get you through it. The above are just a few of many tips that you can consider.

Posted on

Keeping Your BMW Like New: Things To Know

Did you know that the average American tends to spend about 101 minutes every single day driving his car? It suggests that you are to pay around 38,000 hours in your life driving your vehicle. And we do tend to use them for a whole lot of different things.

The importance of cars is growing, and so is their number. With one of the predominant brands being BMW, it’s safe to say that quite a lot of owners can relate. Your car is something which needs care. You need to guarantee that you are servicing it properly so that you can spend those 101 minutes comfortably. If you want to keep less time in the BMW Repairs shop in Rocklin, you might want to take better care of your beloved car.

The Importance of Car Maintenance

Now, the more you take care of your BMW, the less BMW repair in Rocklin you’d have to think of. However, just like the majority of the right habits, regular and routine BMW maintenance is somewhat challenging to get into. Most of the people are going to put it off because it’s time-consuming, expensive, stressful, and seriously inconvenient.

And that’s a problem. Poorly maintained cars, regardless of whether it’s a matter of a BMW or something else are the cause for millions of car wrecks throughout the world every single year.

Maintaining your vehicle isn’t just something that you do for your safety and comfort – you do it for the safety of others on the road as well. It is something that has to be accounted for.

Different Maintenance Periods

Typically, you want to get your car checked out the moment you feel there is an issue. Furthermore, there are regular oil changes that you have to go for through different periods depending on the make of your vehicle and how old it is.

However, there are a few necessary services that you have to consider. The so-called 30k service is when you go for more than 30,000 kilometers, and you have to get some critical maintenance going. It’s a significant one which new vehicles are required to go through. The next milestone is the 60k service after the 60,000 kilometers. It is where the expert will determine whether or not your vehicle involves something else. Necessary and essential components are either changed or fixed. The next one is the 90k service, which is also quite remarkable because it determines whether or not you can keep using your vehicle or you have to consider getting a new one.

All in all, these are some of the things that you have to keep in mind. Getting your vehicle maintained properly is a critical consideration and responsibility that you, as a driver, carry. It stems out from the fact that you have to take care of you and of other drivers who are currently involved. Make sure to maintain your BMW properly!

Posted on

What You Should Know About A Mercedes Benz Tune Up?

Mercedes Benz oozes class. They are a joy to own and even more fun to drive no matter if you have an A class, M class, or E class. To keep them running like new, they should be serviced by a professional automotive technician. Mercedes Benz service and repair should be done at their scheduled time. All cars on the market have a specific time you must have service done, sometimes called scheduled maintenance. One of the key items you maybe know about is a tune-up. But what is involved with getting a tune up on a Mercedes Benz, and where should you take your car to have one done?

What’s Involved in a Mercedes Benz Tune Up?

When you take your vehicle in to have a Mercedes Benz service, an automotive technician will do some things. A complete tune-up involves inspection as well as a parts change. A tune up is performed as part of the 90,000-mile maintenance. If you take your car in for this service you will have all the items done at the same time as the tune-up including:

  • Check tire pressure
  • Check and fill fluids
  • Oil change
  • Check belts and hoses
  • Check windshield wipers
  • Check lights
  • Replace PCV valve
  • Install new air filter

The tune-up itself consists of changing the spark plugs, wires, rotor. The distributor cap will be looked at and replaced if necessary. Your technician may or may not look at the timing of your vehicle and make adjustments if needed. The electronic management system of a Mercedes will be looked over to ensure everything is working correctly. Fuel injectors will also be cleaned during a tune-up as well. The result of having a tune-up is to maintain smooth idle, proper function, and performance.

Any additional problems you may have had since your last servicing or routine maintenance can be addressed during a tune-up too. While you may have thought that a tune up is as simple as changing the spark plugs and wires, you can see that a Mercedes Benz tune-up from a specialty automotive shop will consist of more.

Where Should You have a Tune-Up Performed?

It’s essential to choose an automotive shop that handles Mercedes Benz repair and services explicitly. A general repair shop more than likely will not be equipped with the specialized tools and equipment needed to perform the tasks as they should be. The last thing any Mercedes Benz owner wants is repair and maintenance not being done correctly. Ryan GMW is proud to service all classes of Mercedes Benz for the Auburn, CA and surrounding areas.

Posted on

Essential Service Tips For Your Mercedes Benz

Saving money and being price conscience is at the forefront of many of our minds. It is essential to keep our vehicles up and running correctly. So when you blend these two concepts together, it’s likely you may have thought about doing some simple repairs or services to your Mercedes Benz. Is DIY service and repair the best idea though? In most cases, having your Mercedes service Rocklin, CA done by a professional is the best route. However, there are a few tips for in between services that can help prolong the time in which you need to visit the automotive shop.

Air Filter Replacement

Replacing your air filter isn’t as hard as it might seem. The air filter on your Mercedes Benz, like other cars, is located under the hood. It usually resides in an air box that is clamped closed. Replacing the filter requires minimal tools if any, and a replacement air filter. A clogged or dirty air filter can negatively affect the performance of your vehicle. You can check the filter yourself or have Folsom Mercedes service automotive shop handle the filter replacement.

If you have noticed poor fuel economy, or your Mercedes has become a little sluggish, chances are it could need an air filter replacement or cleaning.

Check the Oil

The engines life depends on the oil inside. Running a vehicle with too much or too little can harm the internal components. Between oil changes, it is a great idea to check the fluids for proper level. Most Mercedes Benz has the dipstick handle labeled with a symbol or says oil on them for easier identification. *Tip* When checking your oil, some dots or lines indicate where the oil should be. It’s crucial only to add the specified oil your manufacturer recommends for the life of your engine.

Check the Tire Pressure

Vehicle accidents occur all the time, and often it can be due to underinflated/ overinflated tires. Periodically, you should check the pressure of each tire to ensure they have the right amount. Commonly, there’s debate about how often you should test, but it’s a simple procedure that is well worth the 5 minutes it takes to do. *Tip* All tires should have the same amount of pressure. The amount they should contain or their max level will be on the tire itself. Don’t overinflate!

If something in your Mercedes doesn’t feel right or you have a concern, it’s an excellent idea to have it looked at. Mercedes repair Roseville shop Ryan GMW can put your mind at ease. We service all classes of Mercedes Benz as well as BMW, Audi, Mini Cooper, Porsche, and Ferrari.

Posted on

Tire Care Tips You Should Take Note Of

Caring for your tires is perhaps one of the easiest ways to improve ride quality and performance of your vehicle. Tires are what makes your car to stay connected to the road. So it’s fair to say that you want the best possible tire condition that you can get. Here are a few practical tips for caring for your tires and getting the most life out of them.

Tire Rotation

A quick tire inspection can alert you to the need for a tire rotation. Even better manufacturers have guidelines on what is the appropriate length of time to rotate them. The universal rule of thumb is to turn tires every 5,000 miles. Having your tires rotated will help to reduce uneven wear. Uneven wear will cause you to have to replace your tires more frequently or prematurely.

Put New Tires On the Rear Axle

There are mixed ideas about where to put new tires if you only purchase two at a time. The best place to put them is in the back. The thought behind this is when you are faced with bad driving conditions the rear wheels will slide more, so having the better tires will allow for more traction. If you lose traction in the rear, the car will spin, so when you get two new tires have them placed in the back.

Matching Tires All Around

If you can afford to do so, replacing all your tires at the same time is the optimal choice. When you purchase tires using the same one at all four corners makes a massive difference on how a car will handle the road. Applying this same tip when you need to purchase one tire can also help. If for instance, you have a tire blow out, get the same tire if possible. It will ensure the tread is matching giving you the best traction results.

Get An Alignment When You Replace All 4 Tires

It may or may not seem like a natural tip to follow. You’d be astonished as to how many people opt out of having an alignment done when they get new tires put on. A wheel alignment will help to prevent uneven tire wear, and the need for tire replacement prematurely. A wheel alignment is just good tire maintenance service you should do, especially when installing a pair or all four tires.

Tire Pressure Is Important

Checking your tire pressure is quick and simple to do. The only tool you will need is a tire gauge. Make sure that each tire has the same amount of pressure. Consistent tire pressure all the way around improves drivability and can help to improve fuel economy. If you have to add air frequently, you might have a slow leak that will require a tire repair such as a plug.

Conclusion

Following these simple tips will help to get the most out of your tires, and improve a vehicles performance and handling. Inspecting your tires is a quick and easy way to stop potential accidents from happening such as a blowout or loss of control in bad weather conditions due to lousy traction.

Posted on

Proper Engine Maintenance Tips

A used BMW can offer fantastic features for a fraction of the cost of a new one. Who doesn’t love saving money on an inexpensive sporty luxury vehicle? Many of the concerns surrounding owning a used a vehicle is if it can it run like new, and will it last a long time? Since previous maintenance records may or may not be available, there are services you should have done when you get a new to you used BMW. The following checklist of items will help restore some of the power loss, make the engine run more smoothly, and possibly give you better fuel economy.

BMW Tune-Up

A tune up can go a long way in an older vehicle that has some higher mileage on it. A common problem with vehicles is random misfires. It can cause power loss and stuttering in the motor. An easy way to correct this problem and give you a smoother ride is replacing the spark plugs and wires. Roseville BMW Mechanic, Ryan GMW can run diagnostics on your BMW to find out the source of your check engine light if there is one illuminated, and perform a tune-up.

Oil Change

The initial thing you should always do when purchasing a used vehicle, and want to ensure the motor will remain healthy is giving it a fresh oil change. It may be the case that you don’t know when the last oil change was performed, so it is always a great idea to have one done just to be on the safe side.

Air Filter Replacement

Engines need air flow, more importantly, clean air that is free of debris and particles. A clogged or dirty air filter will restrict air flow from getting into the intake causing sluggish performance. Replacing an old air filter that shows signs of age or is dirty will help with regaining lost performance and increase fuel economy as well.

Replacing Leaking Gaskets

Older motors and higher mileage motors can become prone to leaks. It can occur in some places including the oil pan, and the valve covers. If you spot any oil leaks, it is a good idea to have them replaced. This way you won’t run out of oil, and risk possible engine failure. An expert BMW mechanic can remove parts and their gaskets that are leaking and apply a new gasket to stop the leaks.

Try a Fuel Injector Cleaner

Fuel injector cleaners are an inexpensive additive that is inserted into the gas tank. Usually, the product contains a detergent that will clean many parts including the fuel line, injectors, and the cylinder head valves. Fuel injectors can clog over time, and this can cause your engine to be erratic and have a rough idle. Fuel injector cleaners can solve this problem by eliminating any debris that has been stuck to the injectors. It is a worthwhile product that might just make your used BMW feel like brand new again. Visit us for more details!

Posted on

Signs Your BMW Might Need Suspension Work Done

Imagine you are coming to a stop light, and need to put on the brakes, quicker than usual. When you come to a stop, you notice that your car bounces. The bouncing of a vehicle almost certainly signals that there is a problem with your suspension. The most common cause being a worn out shock or strut. Shock, struts and other suspension parts play a huge role in keeping your vehicle affixed to the ground, overall ride quality, and most importantly no bounce. Depending on what kind of road you travel on, will affect how long your vehicle’s suspension parts last. If you live on a country road that has gravel and potholes, the suspension parts will wear out faster. When any of the components start to fail, you will notice a difference in how your vehicle rides. Some of the more apparent signs of worn out suspension parts can include:

  • Car Body Sways – can feel like vehicle isn’t firmly planted on the road
  • Lowered Ride Height – on one side or both, car will appear to sag slightly
  • Tire Vibration – especially after hitting a bump
  • Poor Steering Return – When turning the wheel, it doesn’t immediately go back to center
  • Tire Shake – after encountering a hump in the road or braking at high speeds

These are just a few examples of what you might experience when a suspension part is failing or has already broken. A vehicle’s suspension is made up of different components depending on the model vehicle you have. The most common elements are the shocks, struts, springs, and tires. However, some BMW’s utilize a Coilover shock system for improved performance. Often time suspension components will be grouped with steering components because they frequently work together. For instance, control arms can be seen as both because the spring will rest on them.

Struts are a structural part of the suspension. It will not only dampen what you feel on the road, but it also keeps stability in check. These significant parts of your suspension should require replacement when needed.

How Important is a Suspension Inspection?

All the parts of your vehicle need to be in good condition to give you the best ride possible. The suspension system is no exception. To identify any problems an inspection can help. A suspension inspection is not a long process, but it can determine many issues your car might be having. The examination will including looking at the shocks and struts for leaking fluid, weak springs, and how the tires are wearing. After the inspection is completed, you should be alerted to any issues. Replacing parts that need to be replaced can stop from other costly repairs. Continuing to drive a vehicle with worn out suspension can cause steering components to wear out prematurely. It can also cause tires to need to be replaced sooner.

Conclusion

The suspension of your vehicle works together so that you won’t feel every bump in the road. If you aren’t wanting to have a sore back from a car bouncing and swaying, then it is a good idea to have an inspection done and correct any problems.

Posted on

When You Shouldn’t Try DIY BMW Repairs?

Everyone loves to save money where they can. One way to do this is taking on do it yourself projects. Do it yourself repairs is excellent for mechanically inclined people that can usually figure things out. There are, however, times when a DIY project can get you in over your head. When it comes to BMW’s, there are a few repairs that a person can do if they are up for the challenge. Then again some repairs are really best left to a professional. If you have any of these issues with your BMW, then BMW repair shop Roseville, Ryan GMW can help.

Replacing a Blown Head Gaskets

The dreaded blown head gasket. This particular repair, if you Youtube it, can seem like a breeze. It isn’t. To get to the head gasket, much of what’s under your hood will need to come out. That is plenty of bolts and accessories. If you lose anything, it can put the whole project at risk. The problem with replacing your head gasket, besides the difficulty level, is the problem might be more severe than the head gasket itself. Even if the head gasket has blown, the cylinder head might require resurfacing because of warpage. Drop by at Ryan GMW and we’ll assess your BMW if you will need to have more than just the gasket replaced to run correctly.

Repair, Replacing or Rebuilding a Transmission

Transmissions are the trickiest parts of any vehicle. In a BMW this is especially true. Transmissions are known to be complicated if you are thinking about tackling this job, don’t. A professional automotive technician is more qualified to perform repairs or rebuilds. The transmission is mounted to the engine no matter if it’s a front wheel, all wheel or rear wheel drive. To remove it, you have to separate the two. Disconnecting the two might not seem like an impossible feat, but mating them back together is a real pain. Just ask any mechanic. When it comes to anything with a transmission, this is one part of the BMW you don’t want to try and repair.

Replacing Suspension Parts

Removing and replacing parts might seem like a simple do it yourself job, but in the case of suspension parts, it can become challenging and time-consuming. Often these pieces are stuck on there, really stuck on there. They can also require specialty tools to perform the task at hand. These can be done by a do it yourself, but it is most certainly easier to have a trained professional handle them. Replacing some suspension parts might also require a wheel alignment. These are typically done with machines at a shop to ensure everything is aligned the way it should be.

Alignments

There are videos out there that show how to do a wheel alignment at home. While this might seem like a great way to save a few dollars, adjustments made by measuring and eyeballing if things look straight, isn’t as exact as a machine. Therefore the results aren’t going to be the same. There is also the possibility of throwing the alignment off more if done incorrectly. If your steering wheel is crooked and your car is drifting left or right, bring it into a shop for a professional wheel alignment.

Posted on

Function Of A Radiator & Maintenance Tips

The engine’s cooling system is one of the essential features of a vehicle. The purpose of the cooling system is to keep an engine running at optimal temperatures. The radiator is responsible for cooling down the antifreeze/coolant that runs through a vehicle’s motor. If a radiator fails, it could result in engine failure. It is because the motor will overheat from the friction of the movable parts.

A radiator is made up of small fins and tubes that run through it. The coolant flows through the tubes, and the heat escapes through the fins. A radiator inspection can indicate if there is any damage to the exterior of the radiator or if there are any leaks.

The most common radiator problem experienced is leaking. Leaks can occur if there is any damage done to the fins or tubes of the radiator. Leaks can occur when you do not have enough fluid circulating through the system, which will lead to an engine overheating. If a radiator fails ultimately it won’t cool down the fluid and only will be recycling hot solutions through your engine block.

One sign your radiator might not be operating accurately is if your temp gauge keeps rising. Apparently, other problems could contribute to your engine’s temperature to continue rising such as a bad thermostat. But if the radiator is leaking or spraying fluid, it is a sure fire sign that it needs to be replaced. Radiator repair or replacement is vital to keep your engine’s cooling system working properly.

Is there anything you can do to prolong the life of your radiator? The first thing you can do is make sure your fluid levels are correct. The next is to consider having an engine coolant flush. A coolant flush will eliminate any debris that might be flowing through the cooling system. Sludge is also possible if oil gets mixed with coolant or if dirt gets into the system. If your vehicle is overheating or you notice a leak in the radiator, don’t wait to get it replaced. Ryan GMW can quickly restore your radiator or perform maintenance on your cooling system.